Fillocks are often used in the drawings to give them greater graphics and expressiveness. With the help of fills, the properties of the material are usually transmitted or some drawing elements are highlighted.
In this lesson, we will deal with how the fill in the autocada is created and edited.
How to make fill in autoCAD
Drawing fill
1. Fill, like hatching, you can create only within a closed loop, therefore, first of all, draw a drawing tools closed by contour.
2. Go to the tape, on the Home tab, select "Gradient" on the Drawing panel.
3. Click within the circuit and press "ENTER". Pouring ready!
If you are uncomfortable to press "ENTER" on the keyboard, call the context menu by right-click and click "Enter".
Let us turn to editing the fill.
READ ALSO: How to make a hatching in AutoCAD
How to change the parameters of the fill
1. Select just drawn fill.
2. On the Fill Options panel, press the "Properties" button and replace the color of the gradient installed by default.
3. If you want to get a fill with a solid color instead of gradient, in the properties panel, install the fill type "body" and set the color for it.
4. Configure the fill transparency level using the slider in the properties panel. For gradient fill, you can also set the angle of inclination of the gradient.
5. On the fill properties panel, click the "Sample" button. In the window that opens, you can choose different types of gradients or fill with the pattern. Click on the site you like.
6. Pattern may not be visible due to a small scale. Call the context menu by right-click and select "Properties". On the opened panel in the Sample Scroll, find the "Scale" line and set the number in which the fill pattern will be good.
We advise you to read: how to use AutoCAD
As you can see, make fills in autocada just and fun. Apply them for the drawings so that they are brighter and graphic!