As a result of a human error or failure (hardware or software), sometimes you have to break your head over the question of how to restore the hard disk of the laptop or PC. Fortunately, there is a huge number of programs and utilities that allow you to solve this problem.
Hard disk recovery methods
The first thing that we want to mention is if the disk submits signs of a malfunction, it is required to be replaced, since hardware faults are usually not repaired, and software recovery attempts in such cases are only a temporary delay. Therefore, after using all the funds mentioned below, we strongly recommend making a backup copy of important data, then replace the drive to a good one.Method 1: HDD Regenerator
To begin with, consider how to restore a hard disk with bats using the HDD Regenerator program, as it has a simple, available interface, which can be understood even with an inexperienced PC user.
- Load the program from the official website and install it on the PC. Run the HDD Regenerator. Click on the "Regeneration" button, and then "Start Process Under Windows"
- Select the drive on which you want to restore damaged sectors and click "Start Process".
- To start scanning with subsequent recovery, click "2"
- Then press "1" (for scanning and restoring damaged sectors).
- Take advantage of the "1" button and wait until the program completes its work.
The HDD Regenerator is a good tool, but it is not always effective in solving the task.
Method 2: Acronis Disk Director
The second solution that can eliminate disk problems is Acronis Disk Director. The program has the means to check drives and corrected non-critical errors.
- Install the program and open it upon completion of the installation. First of all, select one of the sections of the damaged disk - select it with the left mouse button.
- Use the menu on the left to select "Check".
Mark both items in the pop-up menu and click on the "OK" button.
- Wait until the program does its job.
- At the end of work, close the information window and repeat the procedure for the remaining partitions of the damaged HDD.
Acronis products are known as a reliable tool, but it may be powerless if the disk is damaged irreversible. Also, from the minuses of the program, we note the paid distribution method - the free demo does not know how to work with carriers with a volume of more than 10 GB.
Method 3: HDD Low Level Format Tool
If the data on the hard disk is not as important as its performance, you can use the radical tool, the HDD LOW LEVEL Format Tool utility. The program algorithms are carried out deep formatting of the media, cleaning its surface from all traces of data, which in some cases returns the hard drive to the working state.
- Run the utility. Select a problem drive and click "Continue".
- First of all, check the data on the Device details and S.A.A.R.T. tabs: thanks to this information, you can understand how effective the low-level formatting procedure is.
- To start the disk erasure procedure, open the "Low-Level Format" tab and use the Format This Device button.
Note! During the operation of the utility, all data on HDD will be deleted without the possibility of recovery!
- The operation may take for a long time, especially on the volumetric drives, so you should be patient. At the end of the procedure, the disk will be reconnected and ready to work.
The disadvantages of this method are obvious - the probability of restoring the performance of the disk is very large, but the cost of losing the entire information stored on it.
Read also: Hard disk restoration programs
Method 4: Systems
In the Windows Operating Systems, the basic test and the restoration of failed sectors on disks, known as CHKDSK, is built into operating systems. You can use it from under the system by running the "command line" and in the process of loading the OS. A typical work procedure with this utility is described in a separate manual accessible by reference further.Read more: Using CHKDSK for HDD Recovery
Conclusion
In this way, you can easily restore damaged sectors, and together with them and the information placed in these segments. If you need to restore the hard disk after formatting or return the remote partition of the hard disk, it is best to use alternative programs, such as Starus Partition Recovery.