How to determine the encoding online

Method 1: 2Cyr

The main purpose of the 2Cyr online service is to decode a specific text feeding, but this does not interfere with the use of the tools embedded in it to determine the encoding, which will only be required to copy a small inscription.

Go to the online service 2Cyr

1. Insert in the decoder insert the copied text in the appropriate form using the context menu or the Ctrl + V hot key.



2. Make sure that the text has been successfully added, and then in the "Select Encoding" field, set the value "Automatically (recommended)". Confirm recognition by clicking on the "OK" button, which is located on the right.



3. It remains only to get acquainted with the name of the encoding in the field "Displays as" to find out it.



4. Additionally, you can look at the transfer of it to the read view, if it is unreadable, and also to know which encoding was used for this.



5. In 2CYR there are other readable options that can be used for your own purposes, switching between them in the corresponding pop-up menu.

Nothing will prevent anything to save or remember this online service and contact it in those moments when you want to translate the encoding or define it again. If this option is not suitable, go to the consideration of the following sites.

Method 2: Online Decoder

Online service called Online Decoder also knows how to define text encoding in automatic mode, as well as translate it into a readable view or any other encodings if required. Selection of characters on this site is carried out literally in several clicks.

Go to Online Decoder online service

1. Use the link above or independently open the main page of the Online Decoder website, where you immediately activate the input field and paste the target text there.



2. Opposite the item "Find the text automatically (recommended)", click on the "Selection" button to start the recognition process.



3. The encoding in which the translation is made, the second is displayed.



4. The initial is right after the inscription "I know the necessary encodings." It must be found if it comes to determining the stylistics of the symbols.



5. Transfer to the selected end encoding You see below, you can change it or copy it.



6. Use additional tools online Decoder, if you need to continue the interaction with other inscriptions.

Method 3: FoxTools

FoxTools is another online service, the main purpose of which is to decode text, but its functionality can be used and to determine the required symbolic set, which is happening.

Go to FoxTools online service

1. Activate the input field and paste the previously copied inscription.



2. From the bottom of the Initial Coding field, you will find the "Determine" button, according to which you should click to start the recognition process.



3. If you are transferred in parallel to the read view, select it from the drop-down menu from above.



4. Click "Send" to get the result with all the necessary information.



5. Familiarize yourself with the parameter near the "Source Coding" item to define the symbolic set. If it is displayed not in the code name, find the translation through Wikipedia for a general understanding.



6. Sometimes FoxTools does not recognize rarely used encodings, so it will be necessary to switch to "all encoding" mode and repeat the selection procedure.