How to set up the Internet on windows 10

Surely all users are aware of the fact that before using the Internet, first need to adjust the connection to it accordingly. It is about how to do on devices running Windows 10, we will also tell me under this article.

Internet configuration methods on windows 10

Please note that before proceeding to perform any of the ways, it is necessary to clarify the type of compound provided from the provider. It is from this that will depend on the further configuration process. In this article we will talk about all possible options for developing events. Immediately note that if nothing about using the router does not say, it means that all connections go directly to a computer, and not through the router.

Method 1: IPOE

This method is the easiest of all described, during its execution all the necessary data are tied to the MAC address of the equipment. This means that after the conclusion of a contract with the provider, all you need is to connect their cable to the network card. As a result, all parameters will be applied automatically and a few minutes later you will have the Internet.

Method 3: Ethernet

To create a connection with this method, you must know the IP address, DNS and the mask value. All this data can be found from the provider. In such cases, they tend to issue special memos on which the necessary information is recorded. Knowing them, follow the following actions:

1. Connect the network cable to the LAN-port of the network card on your computer or laptop.
2. Then use the Windows + R keys combination to call the "Run" snap. Enter the NCPA.CPL command and press "ENTER".



3. In the window that opens, you will see a list of available network connections. You need to right-click on that of them, which will be used to access the Internet. From the context menu, select "Properties".



4. Next, click the left button on the component marked on the screenshot number 1. Then click the "Properties" button in the same window.



5. A window will open where you need to enter the IP address, mask, gateway and DNS. To do this, set the mark near the "Use the following IP address" line and write the values ​​obtained from the provider. Then click "OK" to apply changes.



6. After that, you can close the windows open earlier. After some time, the connection must be established, which means it will be possible to use the Internet.

Method 4: VPN

This type of connection is one of the safest, since it is accompanied by data encryption. To create such a connection in Windows 10, you will need a server address and (optional) additional data that you can learn from the service provider. The creation process itself is as follows:

1. Press the "Windows + I" key combination. In the "Parameters" window that opens, click on the section with the name "Network and the Internet".



2. On the left side of the window, click on the "VPN" item. Then in the main area, click the "Add VPN Connection" button.



3. In the first field of the next window, select the only available item - "Windows (built-in)". Name Set any. Be sure to fill in the "Name or Server Address" field in accordance with the data received from the provider. Leave the remaining two items unchanged if the service provider does not require specific values ​​of these parameters. As a result, login and password should also be administered as needed. When specifying the necessary information, click the Save button.



4. Next click on the Created LCM connection. The menu will appear below with the action buttons. Click "Connect".



5. If all the data and parameters are specified correctly, after some time there will be a connection to the VPN network. In some cases, you will first need to re-enter the login and password in the menu that appears (if the appropriate data type is selected).



6. For a faster connection, you can use the network icon in the tray on the "taskbar". After clicking on it, simply select the item named the previously created connections.

Method 5: 3G / 4G modems

This type of connection is offered by many mobile operators. To implement it, you need to purchase a special USB modem, through which the connection is connected to the "World Wide Web". Often, major providers provide their branded software for correct configuration. We mentioned this as part of manuals on setting up devices from MTS and MegaFon.

Read more:

Configuring USB Modem Megaphone

Setting up a USB modem MTS

However, the connection can be connected via Windows 10 settings. For this, you will need only data in the form of login, password and numbers.

1. Connect the modem to the computer's USB connector or laptop.
2. Press the "Windows" and "I" keys simultaneously. Through the "Parameters" window that opens, go to the "Network and Internet" section.



3. Next, go to the left part of the window in the "Dial Set" section. Then, in the main area, click on the "Configure New Connection" line.



4. In the window that appears, select the first line "Connect to the Internet", and then click the Next button.



5. In the next window, click the left mouse button on the "Switched" item.



6. In the next step, you must enter the data obtained from the operator - the dial number, login and password. Optionally, you can rename the connection and set the mark next to the "Remember this password" string. Finally, click the Create button.



7. After that, in the Windows 10 options window, a new connection will appear. Click on its name LCM and select "Connect" from the menu.



8. A new window will appear, in which you should re-enter the username, password and select the number for the dialing from the previously shown, and then click the "Call" button.



9. As a result, a connection to the server will be connected and you can use the Internet.

Method 6: Router

This method implies access to the Internet by means of a router. It can be used both wireless Wi-Fi connection and a connection via a LAN port over the cable. This topic is very extensive, as it includes several of the methods listed above at once. We recommend that you follow the link below and familiarize yourself with the detailed router setup manual on the example of the TP-LINK device.

Read more: TP-LINK TL-WR702N router setup

Method 7: Smartphone

Modern smartphones can be used as modem to work on the Internet through a computer or laptop. In this case, you can install both wired connection via USB port and wireless via Wi-Fi. The main thing is to have a connected Internet on a mobile device.

If you connect a smartphone to a computer via the cable, simply activate the "USB modem" function in its settings. As a rule, the actions list immediately appears on the screen after connecting to the PC.

At the same time, a new connection will be automatically created on the computer and after some time access to the Internet will appear. Check it in the list of adapters. Recall that it is possible to open it through the key + R keys and processing the NCPA.cpl command.

If you decide to use the Internet via Wi-Fi, you will need to make certain settings on the smartphone or use a special software. We were told about all the nuances of such a connection in a separate manual.

Read more: distribution of the Internet from a mobile phone on Android and iOS

Thus, you have learned about all ways to create an Internet connection on devices running Windows 10. Note that in the specified OS, it often happens that or another update disrupts the components. This also applies to the Internet. In this case, we recommend contacting our leadership, which will help solve the problems that have arisen.

Read more: Correction of problems with the absence of the Internet in Windows 10