Driver for SBIR ROCEN

Access to Personal Account and SBS programs are provided only through the EDS, which should be recorded on the USB flash drive. For its correct reading, the operating system will require the Ructane driver. It is about the methods of its installation and will be discussed.

Method 1: Workplace Setup Wizard

The workplace setup wizard allows you to automatically establish the operation of all components associated with the SBS electronic signature. It will suit all those users who do not want to manually upload each component, and is ready to provide all these operations for independently performing a specialized medium.

Go to the official SBI site

1. Use the link above to get to the official SBSS assistance page, where to go down the tab and select "Electronic Signature" in the "Advanced Features" block.



2. After moving to a new page, find the "Workstation Settings" section.



3. In the first point you are interested in clicking inscription "for the SBI".



4. It will be redirected to a new tab "Configuring workplace", where diagnostics will immediately start.



5. If the SBIS Plugin Extension extension is not yet set, you will have to do this at the current stage to continue the diagnosis.



6. The setup wizard will offer to go to the online store, from where adds an add-on.



7. Confirm its installation by clicking on the corresponding button.



8. You will be notified of the successful completion of this operation, and the icon of the add-on under consideration will appear on the panel.



9. Return to the previous page of diagnostics and reboot it.



10. It will automatically continue. The next step is the installation of the plugin if it has not yet been added to the operating system. Click on the Set button that appears.



11. Run the received executable file.



12. Follow the simple instructions to complete the installation of the software.



13. Restart the diagnostic page again.



14. Activate additional features if required. Please note that each of the components must be installed in advance so that its activation is successful. After that, click "Continue Diagnostics."



15. Checking cryptopro and drivers will be made only after authentication in the system. Enter the login and password from the previously created account, and then click on "Login".



16. Expect the end of the inspection of drivers.



17. Select the certificate used or connect the signature device to the computer if this has not been done earlier.

Immediately after selecting a certificate or connecting the device to the PC, the required files will start. You will only run the installer and follow the instructions displayed in the window. After the installation is completed, restart the computer so that all changes entered into force.

Method 2: manual download from the SBI site

If you have completed all the preparatory actions and do not want to check the automatic mode or simply need the driver itself without additional configuration actions, you can download it separately. To do this, on the SBS site there is an appropriate section, interaction with which is as follows:

1. Open the Main Help Page, where to select "Electronic Signature".



2. In the category "Workstation Setup", click on the click "Manually" clickable.



3. A transition to the general manual for setting up a computer to work with electronic signatures will occur. Here in the "Drivers for E-Signature Media", select "Rutoken".



4. Next you need to click on the button "Download".



5. When you go to the Ructanese site, start downloading the latest version of the Windows driver.



6. Take the terms of the license agreement, checking the corresponding item, and then click "Conditions Accepted".



7. After a few seconds, download the executable file will begin. When you finish the download, run it.



8. Configure the option for creating a panel of the control panel of the Ructane on the desktop, and then click "Set".



9. Wait a few minutes until the installation is run. Do not close the current window so as not to reset all progress.



10. You will be notified of successful installation. You can now connect a removable device and check its performance.

For reliability, you can restart the computer if you are not sure that all changes made after installing new files entered into force.

Method 3: Official Website Ruveton

As you already understood, the SBS site is only an intermediary, providing a link to download the driver from the official rootten page. If you wish to download other versions of drivers or you do not have access to the source mentioned above, you can immediately use the second site.

Go to the official website of the route

1. To do this, find it yourself through the search engine or use the reference above. On the main page, expand the "Download Center" section.



2. In the menu that appears, select the section you are interested in. Most electronic carrier owners need a "Windows drivers" category.



3. Start downloading the latest version of files or navigate to view previous, if required.



4. When displaying a list with other supported stable assemblies, find the desired, considering the discharge of the operating system, and press the line for download.



5. Wait for the download start.



6. Run the EXE file received and expect the completion of the installation preparation.



7. Follow the simple instructions to complete this operation.

These were all available ways to install Ructane drivers for SBI. You only have to choose the best and follow the instructions provided to cope with the task easily.