The computer keyboard or laptop is subject to breakage due to the human factor much more often than other components. That is why it is necessary to be neat when it is operational: not in the computer table, periodically make wet cleaning and systematically clean the dust and dirt. The first two listed items are as soon as the device is removed from pollution, but if you are already late, you will find out how to clean the keyboard at home.
See also: why the keyboard does not work on the computer
Methods of cleaning the keyboard
All existing methods of cleaning are simply no sense, since some of them are largely similar. The article will feature the most effective and least costly both in time and in terms of cash methods.Method 1: compressed air cylinder
With a compressed air cylinder, you can clean both the computer keyboard and the laptop keyboard. The device and method of use is pretty simple. These are small sizes, a spray, having a nozzle in the form of a long thin tube. When you click on the top of the high pressure, the air jet is released, which perfectly blows up dust and other rubbers from the keyboard.
Advantages:
- Dry cleaning. During cleaning the keyboard, there will be no moisture drop in it, therefore, contacts will not be subject to oxidation.
- High efficiency. Air jet power is enough to blow even fine dust from the most hard-to-reach places.
Disadvantages:
- Profitability. With a careful cleaning of the keyboard of one cylinder may not be enough, and if it is also polluted, it will take more than two cylinders. This can lead to large cash costs. On average, one such cylinder costs about 500 ₽.
Method 2: Special cleaning set
In specialized stores, you can purchase a small set, which includes a brush, napkin, velcro and a special cleaning fluid. All tools are very simple: To begin with the brush, you need to use dust and the rest of the dirt from visible areas, after which it is used to use velcro to collect the rest of the garbage, then wipe the keyboard with a napkin, pre-dipped with special fluid.
Advantages:
- Low price. Regarding the same cylinder, the presented set is inexpensive. Average up to 300 ₽.
- Profitability. Having bought tools to clean the keyboard, you can use them throughout the life of the device.
Disadvantages:
- Efficiency. Using the set, remove all the dust and the other garbage from the keyboard will not work. It is great for preventing pollution, but it is better to use another way for full cleaning.
- Time. It takes quite a lot of time on high-quality cleaning.
- Application frequency. To maintain the cleanliness of the keyboard constantly, the use of the set is very often (approximately every three days).
Method 3: Lizun Gel Cleaner
This method is perfect in the event that the gap between the keys of sufficient width (from 1 mm) so that the gel can penetrate inside. Lizun is a sticky jelly-like mass. It must be simply put on the keyboard, where he, due to its structure, will begin to leak between the keys. Dust and dirt that is located there will stick to the surface of "lysun", after which it can be pulled out and washed.
Advantages:
- Easy use. All you need to do is periodically wash "Lizun".
- Low cost. On average, one gel cleaner costs about 100 ₽. On average, it can be used from 5 to 10 times.
- You can do it yourself. The composition of "Lizun" is so simple that it can be prepared at home.
Disadvantages:
- Time. The Lizun Square is too small to cover the entire keyboard entirely, so the above procedure must be performed several times. But this deficiency is eliminated by purchasing several more gels.
- Form factor. The gel cleaner will not help if there is no clearance between the keys.
Method 4: Water (for experienced users only)
If your keyboard is polluted very much, and none of the above methods helps to clean it, then only one thing remains - wash the keyboard under water. Of course, before doing this, the input device must be disassembled and remove all the components that are subject to oxidation. It is also worth paying attention to the fact that such a procedure is recommended to do only with computer keyboards, since the analysis of the laptop without proper experience can cause it to breakage.
Advantages:
- Full cleaning. Washing keyboard under water ensures complete cleaning from dirt, dust and other garbage.
- Free. When using this method, financial costs are not required.
Disadvantages:
- Time. To disassemble, wash and dry the keyboard will need a lot of time.
- The risk of breakdown. During disassembly and assembly of the keyboard, an inexperienced user may accidentally damage its components.
Conclusion
Each method given in this article is good in its own way. So, if the keyboard zoom is small, it is recommended to use a special set of cleaning tools or a "lysome" gel-cleaner. And if you do it systematically, then resort to more serious measures do not have to. But if the plot is serious, then it is worth thinking about the acquisition of a cylinder with compressed air. In the extreme case, you can wash the keyboard under water.
Sometimes it is appropriate to apply several ways at the same time. For example, you can clean the keyboard first using a special set, and then blow it with air from the cylinder. In addition to the methods given, there is still a method of ultrasound cleaning, but it is carried out in specialized services, and, unfortunately, it will not work out at home.