Local network as a tool of interaction gives all its participants the opportunity to use common disk resources. In some cases, when trying to gain access to network drives, an error occurs with code 0x80070035, making the procedure impossible. On how to eliminate it, we will talk in this article.
Error correction 0x80070035
The reasons causing similar failures, quite a lot. This may be a prohibition of access to the disk in the security settings, the absence of the necessary protocols and / or clients, turn off some components when updating OS and so on. Since it is almost impossible to accurately determine what caused an error, you will have to fulfill all the instructions below in turn.Method 1: Access Opening
The first thing you need to do is check the access settings to the network resource. These actions must be done on the computer where the disk or folder is physically located.
It's just done:
- Clicking PCM on a disk or folder, when interacting with which an error occurred, and proceed to properties.
- We go to the "Access" tab and click the "Extended Settings" button.
- We install the checkbox specified in the screenshot and in the "Share Resource name" field set the letter: under this name the disk will be displayed on the network. Click "Apply" and close all windows.
Method 2: Changing user names
Cyrillic names of network participants can lead to different errors when accessing shared resources. The solution cannot be called simple: to all users with such names need to be changed to Latin.Method 3: Reset network parameters
Errbial network settings inevitably lead to the challenges of joint access to discs. In order to reset the parameters, you need to perform the following on all computers on the network:
- Run a "command line". It is necessary to do this on behalf of the administrator, otherwise nothing will work.
Read more: Call "Command Line" in Windows 7
- We enter the command to clean the DNS cache and press ENTER.
Ipconfig / Flushdns.
- "Delaby" from DHCP by running the following command.
Ipconfig / Release.
Please note that in your case the console can give another result, but this command is usually performed without errors. Reset will be implemented to actively connect over the local network.
- We update the network and get a new address command
ipconfig / renew.
- Reboot all computers.
Method 5: Disable Protocol
In our problems, the included IPv6 protocol in the network connection settings can be guilty. In properties (see above), on the "Network" tab, remove the corresponding checkbox and perform a reboot.
Method 6: Configure Local Safety Policy
The "Local Safety Policy" is present only in the editors of Windows 7 Maximum and Corporate, as well as in some assemblies of professional. You can find it in the "Administration" section "Control Panel".
- We run the snap-in, clicking on its name twice.
- We reveal the "Local Policy" folder and select "Security Parameters". To the left by looking for a network manager authentication policy and discover its properties with double click.
- In the drop-down list, select the item, the name of which appears session security, and click "Apply".
- Restart the PC and check the availability of network resources.
Conclusion
How it becomes clear from everything read above, eliminate the error 0x80070035 is quite simple. In most cases, one of the ways helps, but sometimes a set of measures is required. That is why we advise you to produce all operations in the order in which they are located in this material.