Usually, at least two coolers are installed inside the system unit, one of which covers the processor, and the second is responsible for blowing air from the case. Each such a fan has its own characteristics and in principle, and in the structure, however, in general, their design is very similar. Like any similar mechanism, the cooler starts to work worse or breaks at all. In this regard, there is a need for disassembling this equipment. Let's analyze the task in detail.
Disassemble a computer cooler
As a rule, computer coolers are not sent to repair, as they are relatively cheap and more rational will resort to the complete replacement of the component. Most often, the disassembly is necessary when it is necessary to lubricate the mechanism to normalize the rotation of the rotor. Therefore, further instructions will be focused on this purpose.
Congratulations, you got access to the bearing and further lubrication must pass without any difficulties. The cooler assembly is carried out in reverse order. Do not forget to install back gum. With the mounting of the usual fan, it will be not difficult to deal with, and in the situation with the processor we advise you to pay attention to the article on the following link.
See also: Installing a processor cooler
As for magnetic coolers, they are now only gaining popularity and ordinary users rarely acquire such models. They do not need to lubricate them, so the disassembly is necessary only in extremely rare cases. If you have never come across such a process, it is better to contact the service center.
See also:
Increase the speed of the cooler on the processor
How to reduce the speed of rotation of the cooler on the processor
Coolers Management Programs