A special utility for interaction with company solid-state drives from Kingston controls the serviceability, state and various aspects of the use of disks. About why Kingston SSD Manager sees SSD, and how to get out of such a situation, we will tell today.
Kingston SSD Manager does not see SSD
The Manager program must automatically determine the presence of SSD in your computer. So in the standard mode of operation of the system from you should not be required any additional actions besides connecting a solid-state drive from Kingston.
The connection of the connection type should be enough to make the brand program to see the drive and starting the interaction with it if the problem was covered in this. Keep in mind that the location of specific and even general settings in your BIOS may differ from the instructions described in the instruction. Therefore, if you cannot detect the names of the rows, try to find the most approximate or use another instruction on the link below.
By the set of the above differences in the original and fake device, you can determine which SSD you have, from Kingston or not, if at least two features of the unreal disc applies to your particular device. And it is precisely this is the reason that Kingston SSD Manager sees a solid-state drive. However, it is not worth discounting a production marriage, and if the disk still has all the features of the company, but does not fully function fully, this is a reason to contact technical support service from the manufacturer.
Cause 3: Drive Malfunction
If earlier SSD was successfully determined by the Kingston program and the problem did not appear suddenly and / or with a non-re-connected device, but made it felt only after some time, problems could occur in the hardware of the device. Solid-state drives at the moment of their development are not devices with an absolute degree of reliability and a large resource. They, like their predecessors of hard drives, there may be various malfunctions during operation, especially if they exploit them incorrectly or under stressful conditions under the influence of negatively affecting factors.
It is important to check the disk check for performance and, if necessary, correct errors that can be eliminated by software at home. It is reasonable to change the timer of using a solid-state drive if it is used as a hard disk, formatted, defragmented, contains a paging file and so on. To do this, we recommend that you familiarize yourself with the special material in individual articles.
Read more:
SSD performance check
Check SSD for errors
Is it possible to format SSD
What is the service life of SSD
Setting up SSD to work in Windows 7 / Windows 10
Disable SSD defragmentation in Windows 7 / Windows 10
After studying the feed material, you can diagnose and correct the device errors, it is better to configure the system interaction and SSD to learn which services to leave, and which, on the contrary, turn off. In addition, it is important to understand what system files should be on a solid-state drive, and how - on the hard disk.
In the material set out above, we told why Kingston SSD Manager sees the drive. This may be due to incorrect settings in the subsystem, non-original solid-state drive, or due to damage or production marriage. If the measures described for the implementation turn out to be not enough and the disk will still not see for the desired program, it remains only to attribute it to the service. There it will make an accurate diagnosis and will produce a repair or replacement under warranty.
See also:
Why doesn't computer sees ssd
What to do if the BIOS does not see SSD