The standard password from Wi-Fi on MGTS routers is far from all users, as well as there are other reasons to change it. The principle of implementing the task is depends on the manufacturer of the device itself, so each user should consider the features of the appearance of the Internet centers in order to quickly and correctly change the access key for the wireless network. We propose to consider three different options by taking the most popular models provided by MGTS.
Login to Routher Web Interface
Before starting the analysis of the basic instructions, we want to talk about the entrance to the router settings so that in the future each time it does not repeat the same actions. This operation is the same for most existing network equipment models from different manufacturers, so you can use universal instructions. To do this, follow the link below and follow the recommendations.
Read more: Login to the web interface routers from MGTS
Option 1: Sercomm RV6688BCM
The most popular model that offers to purchase an Internet service provider when connecting the Internet is called SerComm RV6688BCM. The appearance of the web interface This equipment can change a little depending on the firmware, so you can notice the difference with your online center and the one presented in the following screenshots. In this case, it will be necessary to simply find the menu that will be discussed later, pushing out from the features of the location of the buttons and parameters.
- After authorization, we immediately recommend switching to Russian localization, if it does not happen automatically.
- Then, via the top panel, move to the "Network" section.
- There you are interested in the "WLAN" menu.
- Open the Security item, from where the password will be changed.
- If the encryption protocol is not installed, do it yourself by selecting the recommended option.
- It remains only to set a common key that must consist of at least eight characters. Click on the Show Key button if you want to display the input signs.
- Click on the Apply button to save the changes.
If you wish, restart the router so that the setup immediately applies and the disconnection of all users, which will force them at the next connection attempt to enter the new security key.
Option 2: D-Link
The next most popular router manufacturer, installed by MGTS clients, is called D-Link. For a long time, the company has released new firmware versions for almost all its products, translating users to the updated AIR interface. It is it that we will consider in this instruction.
- After authorization, translate the web interface into Russian by clicking on a specially designated button.
- At first, we propose to make out the example of changing the password through the Wireless Setup Wizard. In the "Start" section, click on the appropriate category to start the configuration tool.
- There, mark the marker "Access Point" and go further.
- If necessary, additionally change the name of the access point or simply skip this step, leaving the same value.
- In the "Network Authentication" field, specify the "secure network", and then in a separate field, set a new security key.
- When you go to the next step, information about the current Wi-Fi configuration will be displayed. If it suits you, click on "Apply" and complete the interaction with the Internet center.
Considered just the option is satisfied with all users, because there is always absolutely all stages of configuring a wireless network. If you don't want to do this or you want to just find an alternative, it is worth using the usual manual setting, which is happening like this:
- Through the left panel in the web interface, move to the "Wi-Fi" section.
- Here, select the category "Security Settings".
- If necessary, change the type of system authentication by selecting a convenient or recommended type of encryption. Then in the "Encryption key" field, change the password, not forgetting that it should consist of at least eight characters.
- Apply the changes by clicking on a specially designated button.
The update of the encryption key will occur literally in a few minutes without the need to restart the router. However, if you want to disconnect current customers now, you should send a router to restart.
Option 3: TP-LINK
In conclusion, we want to talk about another popular manufacturer of network devices, which are actively purchased by MGTS clients. Products from TP-LINK are configured about the same as simply as the examples discussed above, including a banal procedure for changing the password from Wi-Fi.
- The first method is similar to the one we talked about during the analysis of D-Link and is to pass the rapid setting procedure. However, in TP-Link, with Wi-Fi, you will have to configure the wired network. To do this, click on the "Fast Settings" section.
- Confirm the launch of the wizard by clicking the "Next" button.
- Select the operating mode, noting the "Wireless Router" marker. Complete all steps settings until the access point is created.
- Set the appropriate type of protection and press the password in the field.
- Check the current configuration and only then apply the changes.
The faster and point configuration method in the TP-LINK web interface occurs in manual mode. It looks like the execution of the surrender operation like this:
- Through the left panel, go to "Wireless Mode".
- Open the category "Protection of Wireless Mode".
- Set the appropriate or recommended encryption type, and then in the Wireless Password field, specify a new security key.
- Run down the tab and click on "Save" to apply the changes.
Just we figured out three different options for changing the password from Wi-Fi for customers of the MGTS provider on the example of the most popular routers. You can only choose the appropriate and follow the instructions. The owners of the non-mentioned devices simply simply look at the manual to understand exactly how to change the password from the wireless network in the existing web interface.
READ ALSO: Proper MGTS routers