How to put alarm clock on iPhone

Method 1: "Alarm clock" (clock application)

The optimal and simplest solution of the task announced in the title title will be the use of the "clock" application pre-installed on all iPhones.

1. Run the Clock application and go to its bottom panel to the "Alarm clock" tab.



2. Touch the "+" button located in the upper right corner.



3. Specify the time in which the signal to awaken should be received.



4. Determine additional parameters:
   • "Repeat";

   

   • "Name";

   

   • "Melody";

   

   Note: You can choose as a sound signal as one of the standard melodies and the ringtones and music purchased in iTunes, if any.

   

   • "Repeat a signal."

   Method 2: Siri

   In addition to the immediate use of the "Clock" application, you can contact the setting of the signal to Awaken to Siri. For this:

   1. In any convenient way, call the voice assistant, for example, by saying the "Hi, Siri" team, using the button on the iPhone housing or by pressing the Airpods.

   

   2. Tell me "Install an alarm clock."

   

   3. Speak the desired time and, if necessary, change the additional parameters discussed in the fourth paragraph of the previous instruction.

   

   Method 3: "Sleep Mode" (Applications "Alarm Clock" and "Health")

   In addition to the standard alarm, on the iPhone you can configure sleep mode - the time interval, before the start of which the reminder will appear about the rest, and after the expiration of the awakening signal, similar to that in the first method we considered.

   1. Run the "Clock" application, go to the "Alarm clock" tab and, if the sleep mode is not configured, activate the switch of the same name or tap the "Change" button indicated on the image below.

   

   2. In a window with a notification that the sleep function is turned off, tap "Enable".

   

   3. Then, opposite the first record, click "Change".

   

   4. Install your schedule on the dial, first indicating the time of waste to sleep, and then awakening.

   

   5. Next, define additional parameters:
      • "Sounds and tactile signals";
      • "Volume" signal;
      • "Later" (the ability to postpone the signal).

      

      Method 4: third-party applications

      In the APP, you can find quite a lot of applications, the main functionality of which is the decision of the task announced in the title title. As an example, we use one of these, noting that the use algorithm in most cases is similar.

      Download alarm clock for me from app store

      1. Run the application and first make it necessary permissions.

         

         In our example, there are access to geoction and sending notifications.

      

      2. Familiarize yourself with the simple instruction on the use and / or description of the main features (depends on the application used).

      

      3. Once on the main screen, tap the add button to add a new signal to the awakening, which in most such solutions is made in the form of "+", only its location can differ. In our case, for this you need to go to the on-screen screen or select the appropriate item in the menu of the "+" element.

      

      4. If the default signal time is satisfied with you, simply activate it. To add a new record, tap "+".

      

      5. Specify the desired awakening time, after which you define additional parameters (again, depending on the application used, they may differ).

         

         • "Sound";

         

         • "Repeat";

         

         • "Repeat alarm";

         

         • "Method of shutdown";

         

         • "The note".

         

         Method 5: Apple Watch

         Branded hours from the company EPPL can also be used as alarm. In this case, it is enough to refer to both the first way of this article, after which at the specified time on the accessory will operate a beep, and resort to a separate configuration, which will be discussed below.

         1. Run the "Alarm clock" application on the clock.
         2. Tap on the "Add" inscription.

         

         3. Using the Digital Crown wheel, specify the desired awakening time, then click "Set".

         

         4. For the subsequent on / off of the installed signal to the awakening and determining the parameters of its repeat, tap the created recording and make the necessary changes.
         5. To certainly not sleep, check whether the repeat function is active. To do this, tap the alarm in the list and pay attention to the "later" parameter - the switch opposite it must be active. If this is not the case, turn it on.

         

         Advice: If you want to install an alarm clock on an epple, which does not make a beep and triggered by touching the wrist, activate the silent mode - for this, call the "control point", touching the bottom limit of the accessory screen, a little delaying your finger, and then shut up and tap the button With the image of the bell. A similar action can be performed on the iPhone, in the Apple Watch application on the next path: "My clock" - "sounds, tactile signals" - "silent mode".

         

         Using Apple Watch as desktop alarm

         Eppl Watch can also be used as separate clock with alarm clock, placing them for the night on the bedside table. For this:

         1. Open the "Settings" on the clock.
         2. Go along the path "Basic" - "Night Mode" and activate it.
         3. If, after performing these actions, connect the Apple Watch to the power source, it will be displayed not only the charge status, the current time and date, but also the response time to the awakening (provided that it was previously set). In order to see this information on the accessory screen, touch the display and push it slightly (sometimes enough to push the table slightly for this).

         

         4. If the alarm clock was installed according to the instructions from the first method, that is, in the "Clock" application application on the same name on the phone, Eppl Watch will go away with a delicate beep.
         5. When the alarm is triggered on the clock, tap Digital Crown wheel in order to postpone the signal to the awakening for 9 minutes, or press the side button for its full shutdown.

         

         Method 6: Smart Watch and Fitness Bracelets

         If you are the owner of smart clocks or fitness bracelet from third-party manufacturers, set the signal to the iphone on the iPhone in providing such accessories by the proprietary application. The most popular among those are decisions from Xiaomi, about the use of which we have previously been told in a separate article. In the case of the gadgets of other brands, it will be necessary to act by analogy.

         Read more: How to set an alarm clock on Mi Band