Twitches itself mouse in Windows 10

Method 1: Sensor Check

One of the most common causes of problems with the spontaneous movement of the mouse cursor in Windows 10 - the presence of foreign objects in the sensor field. To him might stick baby, or even a very small piece of paper, which entails such intermittent fluctuations.

You will need to turn the mouse and check the sensor itself. In most cases, simply wipe it with your finger, and sometimes have to remove debris with a damp cloth, then wiping the entire surface.

Method 2: Checking surface

Another reason - the wrong or a contaminated surface. Whether the mouse is a laser or optical, on certain surfaces, such as glass, gauges behave correctly, that affects the appearance of a cursor movement problems. Podstelil mat or in extreme cases a sheet under his arm a piece of paper.

If you have carpet, and so, it will require protryahnut and wipe with a cloth to remove any debris that may also provoke some difficulties. Carpets with a glossy coating is generally recommended to replace the cloth or coated with a special material.

Method 3: Change the mouse sensitivity in Windows 10

Too much sensitivity of the mouse, installed in the operating system, can cause vibrations when you move just one millimeter, which happens even in those moments when the user simply holds the device and does not perform any movement. In addition, it can also affect the function of activated improve the accuracy of the pointer, because then the cursor stops precisely to respond to manipulation of the user and moves to the desired point of a few centimeters on their own. Check and change these parameters like this:

1. Open "Start" and go to "Parameters".



2. There you are interested in the category "Devices."



3. Go to the "Mouse".



4. Click on the clickable label "More Options Mouse."



5. Click the "Pointer Options."



6. Move the slider that is responsible for the speed of the pointer movement in the lower state, if you want to make it slower, and uncheck "Enable Enhance pointer precision installation."

It is mandatory to apply the changes, and then proceed to the verification of the effectiveness of this method.

Method 4: Change DPI in the mouse driver

If you purchased a mouse, which is customizable DPI (sensitivity), likely changes to the operating system itself, practically does not affect the outcome, so you have to use special software or switch the DPI by pressing on a specific button on the very mouse (usually it is located below the wheel).

In the case where the software is not already installed, we recommend you read the article at the link below, to the example of peripherals from Logitech to deal with how to carry out such loading.

See also: Installing drivers for Logitech mice

1. After successfully installing the driver with a graphical interface, its icon should appear on the taskbar. Click on it to go to further settings.



2. Switch to the section that is responsible for the configuration of the considered devaysa if this does not happen automatically.



3. Manually adjust the sensitivity by setting its value in 3000 and less DPI (if we are talking about the use of the monitor is not greater than 32 inches), or select templates present.

If the software can not find the mouse, we can only press the button to switch sensitivity based on the values ​​established by the manufacturer. In case of lack of DPI on the mouse is not adjustable, so effective it should be the previous method.

Method 5: Driver Update

We turn to the methods that are rarely effective, but still worthy of consideration. The first such was the need to update the mouse drivers, because in certain situations, systemic problems may also cause the cursor jerking.

In Mode 4, you will see instructions on the link for installing drivers. It is suitable and to update them, so just go for it, choose a desired option and follow the instructions.

Method 6: Virus checking for viruses

Malicious files that have a direct impact on the operability of the operating system can also provoke the problem under consideration, so if the previous recommendations are unscluded, it is worth checking your PCs to the presence of viruses. You can do this using a special software, which is more detailed in the following material.

Read more: Fighting computer viruses

Method 7: Removing Suspicious Soft

Additionally, it is recommended to check if there are no programs on the computer, the installation of which was not manually manually was performed. Perhaps it is the similar software that has such an impact on the manifestation of involuntary mouse movements. You can check and get rid of such applications like this:

1. Open the "Parameters" menu through the "Start".



2. From the sections list, select "Applications".



3. The Delete button launch the uninstallation process of unnecessary programs.

You can get more detailed information about this in a separate material on our website by reference below. In the same place, you will learn about the methods of full removal of software, if it leaves after a files located throughout the computer.

Read more: How to remove the unsuccessful program from the computer

Method 8: Increased PC speed

If the PC works too slowly, the hangs and brakes constantly appear, most likely, the atypical movement of the mouse cursor is just caused by this. For example, you made a slight movement, and during this, it happened, after which the team was re-sent. Accordingly, the cursor will move without your manipulation. In that situation, when there are really problems with computer speed, it is recommended to solve this difficulty by the options described in the Guide further.

Read more: How to improve computer performance