General recommendations
The following methods imply the execution of a specific algorithm for actions that can be worked, and an error when trying to print from the HP Deskjet 2130 printer will disappear. However, before this it is worth checking general recommendations that are extremely simple in sales, but it often allows us to do without the application of the following instructions.- First send the computer to reboot and do the same with the printer. Turn it on only after the shutdown will take at least a minute. Connect the printing equipment to the PC and try to send the document to print now.
- Remove the cartridges and check them out for paint or look at the CHART state. Ordinary cartridges can be slightly shaken and insert back, which will allow them to extend them the service life. The ink continuous supply systems need to be fed if the paint is ended in them. Deployed instructions on how to replace or fix the cartridge you will find in separate manuals on our website by clicking on the links below.
- The next step is to check the cables. Make sure that they are not only securely sit in their connectors, but also do not have external physical damage. Replace the cable if it was abandoned somewhere, and if there were no visual problems, you can try to use another USB port on your computer.
- Make sure that the paper is not over and is normally sits in the tray. Correct it or put a few more sheets to simplify the printer to capture her. Printing may not start and in cases where the A4 shreds are stuck inside the device, so it is recommended to inspect the printer from the inside.
Read more:
Replacing the cartridge in the printer
How to fix the printer cartridge
If, after performing all these actions, the printer again refuses to print any documents, use the more narrow-controlled methods that we will talk about.
Method 1: Checking the printer in Windows
The first action that needs to be performed in the operating system is to verify the correct display of the printer in the HP Deskjet 2130 system and settings. This procedure will take the user with a literally one minute.
- Open the Start menu and call the "Parameters" application.
- It is interested in the category "Devices", where all the installed printers are located.
- Through the panel on the left, select the "Printers and Scanners" section.
- Lay there the necessary model from HP and click on this line to display the elements of the interaction.
- Go to the device management by clicking on the corresponding button.
- Install this printing equipment as the main one.
- Next, open the "Printer Properties" section by clicking on this inscription.
- Go to the "Ports" tab.
- If the "Allow Bilateral Data Exchange" item is available, check the checkbox near it and apply the changes.
When the printer settings are missing or it is not displayed at all in this menu, it means that the connection procedure is incorrect and most likely missing the driver of this device. To correct this situation, use the reference instructions below by downloading the HP Deskjet 2130 software by any convenient method.
Read more: Search and installation of drivers for MFP HP Deskjet 2130
Method 2: Print Unlock
The printing process of printing involves removing all tasks along with their files that could hang during the system failure or unforeseen disable device. In this case, even the reboot of the computer will not update the list of files and you will have to deal with yourself.
- In the same menu "Device Management", go to the task view by clicking the "Open Print Queue" button.
- Right-click on each document present in the queue and in the context menu, select "Cancel".
- Close the current window and call the service application by finding it through the Start menu.
- In the list, which is sorted by alphabetically order, find the Print Manager service and click on it twice.
- The properties window will appear, where it should be stopped, and then apply changes.
- Through the "Explorer", go along the path C: \ Windows \ System32 \ Spool \ Printers, where all files added to the print queue are stored.
- Remove them and send a computer to reboot. After the start of the new session, make sure that the service has just been completed automatically launched. Otherwise, do it manually.
Method 3: Disable Windows Firewall
The operating system firewall rarely has a negative impact on interaction with printing equipment, however, this situation may arise due to blocking bilateral data transmission. In diagnostic purposes, turn off the firewall using the instructions on the following link, and then check if it affected the solution to the stamp problem.
Read more: Disconnect the firewall in Windows 10 / Windows 7
Method 4: Reinstall printer drivers
-Pechatyu-Printera-HP-Deskjet-2130.png »Alt =» Temporary disabling firewall to solve printer problems HP Desk
Incorrectly selected or errors, HP Deskjet 2130 drivers can also lead to the fact that in the end, the seal will be inaccessible. Then you need to delete the current software and download new. As for uninstalling an active driver, this is implemented easy, but beginner users we recommend familiar with the relevant management.
Read more: Delete the old printer driver
We have already written about installing the driver at the end of the method 1, so climb to it and click on the link left to familiarize yourself with the appropriate manual and choose the optimal method of installing drivers.
Method 5: Windows Restore
To restore the operating system should be resorted only in cases where none of the above options have brought due results, but there is confidence that the device itself is working. For recovery, you can use the previously created point or loading flash drive, which is expanded later.
Read more: Windows restore options
Additionally, we will specify that the owners of non-license versions of Windows may need to choose another assembly or go to the licensed, since it is often necessary for the seal problems caused by internal failures created by the creator of the OS assembly itself.