Firmware for routers D-Link

Anonim

Firmware D-Link Dir

So, ftp.dlink.ru does not work the second day - either an error 403 FORBIDDEN, or a user name request and password (standard from routers are not suitable, checked :)) The question arises: where to take firmware?

UPD: The official website of the D-Link now works, I remove links to firmware from here.

If you are interested in the process of installing a new firmware, then about it here.

I do not know how long the situation with the official source of firmware will continue. Perhaps the site will not be more accessible at all. I looked for D-Link on foreign sites, there seems to have a model range, so I didn't even find a favorite DIR-300. But something is still there.

Currently there are no popular firmware: D-Link DIR-320.

Download firmware

D-Link DIR-300NRU B5 and B6 (thanks to Drue S'eric)

Download - The following firmware in the archive:
  • DIR-300NRU Rev.B5 F / W 1.3.3
  • DIR-300NRU B5 / B6 F / W 1.4.3
  • DIR-300NRU B5 / B6 F / W 1.4.4
D-Link DIR-300 NRU B7 (Thanks MAX) Download - The following firmware in the archive:
  • 1.4.1
  • 1.4.2
D-Link DIR-615 K1 (thanks to Lorence) Download - The following firmware in the archive:
  • 1.0.0.
  • 1.0.9
  • 1.0.10
  • 1.0.13
  • 1.0.14
  • 1.0.15
  • 1.0.16
  • 1.0.17

DIR-320NRU Firmware 1.4.3 Download

I send 3 firmware for this router (B5, B6). There are no other - no one knew that Dlink fell off.

The firmware 1.3.3 has shown the most stable.

1.4.4 - If the client is stuck in unmanaged equipment, can create a large problem. "Perfes" sector, i.e. All who in uncontrollable equipment can get "limited or absent". How to flood the router at the same time - it is unknown, no one gave a prominency and analyze.

1.4.3 - Nobody complained especially. 1.4.5 - Want to download today, but FTP ordered a long time to live.

PS: Most routers of this manufacturer love to raise connections within 30 seconds from the moment of inclusion. There is equipment on which the port rises more than 30 seconds. And if the client is included in such equipment, then it does not raise the connection at all, or the connection will rise, but no page will open.

For example, for Linksys in this case it helps the team «spanning-tree portfast» on the client port. On the length, the DES series is such a problem, it seems like, not detected. Unfortunately, the client himself find out where it can not be stuck. This should be done by the Customer's Treatment Provider.

PSS: If I used to be DIR-300 A1, relatively, I liked. There was only one glitch - with a long dealership of the equipment, I did not raise the connection - in the counter failure, I stopped trying. Now with b4 and further revisions - no one advise to buy. They got me very much of their buggy.

وڌيڪ پڙهو