Yadda za a watsa Canon firintar

Yanzu firinto suna shahara sosai tare da masu amfani da nau'ikan daban-daban. Canon shine ɗayan shahararrun masana'antun kayan aiki da sikeli, wanda ya ci kasuwa tare da manyan adadin samfuran da yawa. Sabili da haka, muna son ƙaddamar da koyarwar duniya wanda hanya don cikakkiyar tsinkaye na wannan kamfani kamar yadda aka bayyana ko kuma maye gurbin abubuwan da aka gyara.

Mun watsa katangar daga canon

A cikin aikin yau, babu wani abu mai rikitarwa, babban abin shine don nemo skyryriver da nuna daidaito ga doka. Amma ga tsarin samfura daban-daban, kusan dukansu sun cika gwargwadon ƙaƙƙarfan ɗaya kuma suna da ƙirar irin wannan. Koyaya, idan an gano discpancies tare da masu zuwa, karanta umarnin da aka haɗa a cikin saiti, inda don nemo bayani game da cire bangarori ko abubuwan haɗin.

Mataki na 1: Shiri don cikakken Disassebbly

Kafin fara Disssembly, ya zama dole a rarraba manyan sassan - kicin, roller na kama da kuma bring yankin. Sai bayan hakan zai yiwu a shiga na'urar da ke ciki ta kwance duk sauran bangarorin ba tare da wata matsala ba.

1. Kashe firintar, sannan cire wutar lantarki daga soket ɗin da mai haɗi a kan na'urar kanta.



2. Jira kayan aiki, idan kafin hakan ya yi aiki da himma. Aanne saman murfin kuma a hankali cire katun katako ko katako. Wani lokacin masu amfani suna da wahalar cire wannan daki-daki. Za'a iya samun cikakken bayani game da warware wannan matsalar a cikin sauran kayan da muke amfani da su akan hanyar da take zuwa.



Mataki na 2: Cire murfin hagu da dama

A lokacin da yake bincika kayan aikin buga takardu, zaku iya lura cewa akwai wasu lids guda biyu a gefuna. A zahiri, ba su bambance tsakanin ka'idar cirewa:

1. Undscrew the dunƙule wanda ke aiki don hawa murfin ga lamarin. Da fatan za a lura, a cikin wasu manyan samfuri na Dutse yana ba da amsa zane-zane da yawa, kuna buƙatar samun su duka. Sai bayan wannan, a kasan, gano wuri na latch kuma motsa shi har sai sautin da ya dace ya bayyana.



2. A gefen saman murfin akwai wani latch, cire shi da motsi na Neat.



3. Yi karamin juyawa na bayan murfin, sannan ci gaba da tura gaba daya cire shi daga gidaje.



4. Idan akwai matsaloli da rikice-rikice, yi la'akari da a hankali a hankali a hankali ƙarin masu taimako, alal misali, wani lokacin akwai wani latch a ƙasa.

Kamar yadda aka ambata a baya, bangarorin biyu suna da cikakken iri ɗaya, saboda haka zaka iya yin daidai da aiki kuma tare da murfi na layi daya.

Mataki na 3: Murfin saman da na baya panel

Bayan an kammala shi da rauni na bangarorin biyu, kawai babba da kuma bunkana da baya ya kasance. Bayan cire waɗannan sassan, ba za ku iya bincika dukkanin injun ba, amma har ilauxrewrews ta juya su, da yardar rai juyawa da skels na filastik bangarorin filastik.

1. Madaga murfin saman kuma nemo dunƙule iri biyu a ɓangarorin biyu, waɗanda ke yin aiki don sauri. Cire su da sikirin.



2. Ana haɗa kayan buɗewar ta amfani da shirye-shiryen filastik. Kuna buƙatar matsi masu ɗaukar hoto guda biyu kuma ku cire shirye-shiryen bidiyo biyu.



3. A bayan na'urar yawanci ana haɗa dunƙule ɗaya ne kawai, kuma yana gefen hagu.



4. Bayan cire dunƙule, ya isa ya ɗaga kwamitin kuma cire shi daga madaukai. Ya kamata ya zama da sauƙin cin nasara, tunda dukkanin sukurori da shirye-shiryen saman kwamitin an riga an fitar.



5. Sannan cire murfin saman ta hanyar ɗaga shi.



6. Lokacin da kuka sanya wannan kwamiti ɗin ya sa, kula da makullai biyu: ya kamata su kasance a cikin ainihin matsayin su, wannan shine, a cikin tsagi da suka dace.



Mataki na 4: Ana cire gaban kwamitin

A bisa ka saba da matakan don cire kashin baya, babba da kuma iyakoki, wanda tare da kirkirar daya da saurin saukarwa na gaba don gaba. Anan kuna buƙatar yin hankali sosai saboda an gyara wannan abun a latches, lamba da wurin da abin da ya bambanta akan samfura daban-daban. Dole ne a gano su da tanƙwara kansu gwargwadon misali mai zuwa:

1. Nemo babban latch a gefen hagu ko gefen dama kuma ya ƙasƙantar da shi, sannan ku ja da kwamitin kadan kadan.



2. Bayan ƙananan ɓangaren an saki, ci gaba da cire abubuwan da kanku, yayin ɗaukarsa kaɗan don cire haɗin da sauran sakin da suka rage.



3. A hoton da ke ƙasa kun ga misalin wurin Latch. Tare da cikakken bincike na na'urar, ana iya gano su da kansu da kuma tura kayan taimako idan ka cire haɗin kai da hannu da hannu.



Wannan yana cire abubuwan kariya sun kammala, kuna da firinta tare da buɗe kayan haɗin ciki. Matakan da ke gaba za a buƙace su da matsanancin taka tsantsan don ba da gangan ba da gangan ba su karya kebul ko lalata allon kwamitin gudanarwa na gudanarwa.

Mataki na 5: Cire Cire Cike Management

Kwafin sarrafawa yana da alhakin cikakken aikin firintar. Yana ba ku damar saita kaddarorin Bugawa ta hanyar kwamfuta, ɗaukar siginar lantarki daga maɓallan kan kujeru da kuma samar da wasu mahimman ayyukan. Ya ƙunshi abubuwan haɗin abubuwa da yawa, duk sun samar da tsarin guda. Lokacin da aka rushe ɗayansu, ɗayansu na iya ɗanɗano mugfunction ko cikakken ƙididdigar shi, saboda haka dole ne a cire cirewa kamar yadda zai yiwu. Cire dukkanin igiyoyin cirewa, riƙe mai haɗawa na filastik, kuma ba don wayoyi kansu ba. Yawancin lokaci, a kan allo, duk an yiwa alama alama tare da alamomin, saboda wanda ba shi da wahala a samu abubuwan da za'a iya cirewa. Na gaba, cire duk ƙwayoyin takalmin.



A gefen firinta akwai ƙarin skurs biyu da ke riƙe da guntu. Bugu da kari, akwai waya mai karfi, wanda kuma yana buƙatar haɗin.



Bayan haka, za a iya samun kwamitin a hankali kuma a sanya masana'anta ko roba roba don gujewa scuffs. Suforewa na allo zuwa cibiyar sabis kawai a cikin akwatin kariya da fim don guje wa wani busawa da fashewa a wani bazuwar digo.

Mataki na 6: Rage Rage Ruwa na Thermal

Yanzu kun isa wurin yanar gizon Thermal. Wannan sashi yana yin aikin tandere da gasa a cikin yanayin zafi a kan yanayin zafi. Wasu lokuta yakan kasa, kamar yadda aka tabbatar da tawada ta sminareare a gaban zanen gado. Idan kana buƙatar cire da maye gurbin kumburi, kawai a haɗa skrening, yawanci adadin wanda bai wuce guda uku ba.



Lokacin shigar da sabon kumburi, yi la'akari da wurin da alamar filastik. Yana da mahimmanci a aiwatar da dukkanin ayyuka ba tare da lalata wannan sashin ba, in ba haka ba za ku iya samun sabon abu, kuma wannan zai kasance a cikin Discrepir.



Mataki na 7: Node na sufuri

Akwai bambance-bambancen da yawa daban-daban na nodes jigilar takarda. Ba za mu shiga cikin bayanan fasahar kowane ɗayansu ba, amma kawai gaya game da hanyar rushe wannan tsarin. Yana kwance a cikin sauki etcreting na duk m. Yawancin lokaci suna located a duk kewaye da firintar kuma ya tsaya a tsakanin sauran sukurori a cikin girman su.



Mataki na 8: Tubar Laser

Mataki na ƙarshe na abubuwan disassembling disaswembling kayan da ba a rufe shi ba daga Canon shine cirewar laser a batun batun na laser na'urori. A ɓangaren firintar Inkjet ba ya bambanta, amma yana da halayenta, kamar yadda zaku iya karantawa a cikin umarnin. Amma ga kwamitin laser, wanda aka yi shi kamar haka:

1. Da farko, zai zama dole don cire kuɗin ƙira. Kudin ƙira shine shigar microprocessor da alhakin saurin na'urar. Yana tafiyar da duk bayanan da aka watsa daga firinta zuwa PC da kuma akasin haka. A wannan kwamitin akwai sauran abubuwan haɗin - Ram, Rom, wasu kwakwalwan kwamfuta, wanda ya samar da sarkar guda. Rikicefin lasisi na laser zai yiwu bayan an cire madauki daga tsarin.



2. Bayan haka, ana cire ƙarin madauki.



3. Duk sukurori akan murfin ƙarfe ba a kwance.



4. Ana haɗa ta USB da madaukai na allon sarrafa injin ɗin an katse, kashe hanyar ta kuma cire shi.



5. Sannan a sami kusurwoyin dunƙulensu na ƙarshe na toshewar laser kuma ana ɗaukarsu Discanet.



Yanzu ana ganin firintar canon, zaku iya aika sassan da suka dace zuwa cibiyar sabis ko don samar da su da bincike na zaman kansu. An gudanar da Majalisar ta hanyar hanya ta gaba. Kada ka manta su sanya dukkan sukurori zuwa ga wurarenku, kar a rasa su kuma kada ku rikita, saboda haka yayin aikin ba ya shuɗe ko kuma ya lalace ko kuma ya lalace.

Duba kuma:

Tsaftace Fayilolin Canon

Yadda za a saita firintar Canon