Yadda ake sake sake toshe toshe a cikin Autocada

Kusan kowane mai amfani yayin aiki akan zane a cikin Autocad yana amfani da tubalan, tunda wannan shine babban nau'in abubuwa, tsarin ƙirar ƙirar ƙira. Koyaya, wani lokacin akwai buƙatar sake fasalin ƙungiyar abubuwan da aka kirkira da aka kirkira, wanda ba zai iya yin latsa a maballin ɗaya ba. Don samun nasarar magance wannan aikin, zaku buƙaci ƙarin hanyoyin hadaddun kuma kuna yin wasu algorithm na ayyuka, wanda za a tattauna a ƙasa.

Suna sake fasalin a cikin Autocad

A yau muna son nuna zaɓuɓɓukan da suka dace da suka dace waɗanda zasu cimma burin da ake so, amma kowannensu yana aiki daidai. Sabili da haka, muna ba da shawarar ko dai duk umarnin don idan akwai buƙatar ko da yaushe san, wane salon zai zama mafi kyau duka.

Hanyar 1: Yin Amfani da Rename

Masu amfani, kawai fara mika software a karkashin la'akari ko riga suna aiki na dogon lokaci, sanin cewa yawancin ayyuka za a iya kiranta ta hanyar na'ura wasan bidiyo. Akwai wata kungiya da zata baka damar sake suna suna suna suna wani nau'in kowane nau'in:

1. Danna sau biyu akan rukunin da ake buƙata tare da maɓallin linzamin kwamfuta na hagu.



2. Menu na daban "Gyara Daidai" Menu na bude menu, inda jerin duk kungiyoyin da ke gudana. Za'a nuna toshe a baya za a nuna alama a cikin shuɗi, kuma za a nuna taga taga a hannun dama. Abin sani kawai kuna buƙatar tunawa da ainihin sunan, la'akari da rajista na alama, bayan wanda zaka iya rufe wannan menu.



3. Yanzu fara bugawa a kan _rename umarni da sauri, sannan ka zabi fitarwa.



4. Latsa lkm akan rubutun "toshe" a filin shigarwar.



5. Saka tsohuwar sunan toshe wanda kuka koya a 'yan seconds da suka gabata.



6. Sa'an nan saita sabon suna kuma latsa maɓallin Shigar.



7. Duba canjin nasara a cikin shafin "Saka" shafin katangar.

Kamar yadda kake gani, aiwatar da duk ayyukan da ba za su dauki fiye da minti daya ba. A lokaci guda, Ina so in lura cewa kamar yadda zaku iya sake suna cikakken abu duk nau'ikan abubuwa, domin wannan kawai kuna buƙatar sanin sunayensu kuma ku zaɓi su lokacin kunna suna.

Hanyar 2: Createirƙiri kwafin toshe tare da sabon suna

Masu amfani da farawa ba su san wannan ba, amma akwai wani yanki daban a cikin Autocadus, wanda aka shirya shinge. Akwai ma'anar, shigarwa da sauran sigogi. Yanzu hankalinmu zai mai da hankali kan "Ajiye azaman" ayyuka, yana ba ku damar ƙirƙirar kwafin toshe tare da sabon suna, yayin da ke riƙe da asalin. Wannan na iya zama da amfani a lokuta inda kake buƙatar samun ƙungiyoyi masu mahimmanci guda biyu, amma tare da sunaye daban-daban don ƙarin gyara.

1. Sau biyu danna lkm ta toshe don matsawa zuwa taga Shirya.



2. A ciki, zaɓi rukuni wanda kake so aiki, ka kuma danna "Ok".



3. Fadada ƙarin zaɓuɓɓuka a cikin Open / Ajiye Sashe.



4. Latsa maɓallin "Ajiye azaman".



5. Saka sabon sunan toshe kuma danna Ok.



6. Rufe edita ta danna kan maballin m.



7. Yanzu zaku iya lura da sabon rukuni tare da sunan da aka ƙayyade a cikin jerin katanga.

Wani lokaci, bayan aiwatar da irin wannan ayyukan, dole ne a cire tsoffin bulo. Kuna iya yin wannan ta hanyar hanyoyin daban-daban waɗanda aka bayyana a cikin abin da aka fi dacewa a cikin wani labarin ta hanyar haɗin yanar gizo mai zuwa.

Kara karantawa: Share shinge a cikin shirin Autocad

Game da aiwatar da sauran magidano da tubalan da wasu abubuwa na zane, sannan labarin ilmantarwa game da batun amfani da Autocad akan gidan yanar gizon mu zai taimaka wajen magance wannan. A ciki, zaku sami tarin litattafai da taƙaitaccen bayanin kayan aikin da ayyuka.

Kara karantawa: amfani da shirin Autocad

Yanzu kun san hanyoyi biyu da ake samuwa don sake suna toshe a cikin Autocada. Ya rage kawai don koyan jerin ayyukan don hakan a kowane lokaci yana da sauri don amfani da ɗayan zaɓuɓɓukan da aka gabatar kuma yana ci gaba zuwa saitin sauran saitunan zane.