Firmware Nokia 6300.

Ya fuskanci aikin da ba daidai ba ko rushewar tsarin software 40, yana sarrafa albeit tare da "tsohuwar mutum" gwargwadon wayar tarho (RM-217), masu mallakarta sune galibi yana neman hanyar firmware. Labarin ya ba da shawarwari hanyoyi biyu masu tasiri don sake mai da tsarin gwargwadon tsarin ƙayyadadden samfuri ga duk masu amfani.

Ko da babban burin burin Nokia 6300, masu amfani masu zuwa ana za'ayi a wuyansu da hadari, da kuma tare da cikakken tallafi na alhakin da aka samu, ciki har da korau!

Shiri

Kafin sauya zuwa tsarin sake maimaitawa akan wayar Nokia 6300 Wayar kai tsaye, kuna buƙatar gudanar da wasu magudi na shirye-shirye da kuma karanta bayani akan aikin da labarin ya ɓarke ​​a taken taken.

Na tilas

Duk akwai zuwa Rana, Hanyar Maimaita Tsarin kuma Sabuntawa Tsarin akan na'urorin Nokia akan Jerin 40. Gayyato amfani da software na musamman aiki aiki a karkashin Windows. Don haka, don aikin nasara akan firam ɗin da aka yi a hankali, za a buƙaci mible PC da lambar ɗan'uwan ", da kuma tabbatar da ma'amala da direbobi.

Shigarwa na direbobi

Tun da hulɗa da zaɓuɓɓukan firmware da aka shigar da aka shigar tare da na'urar hannu mai yiwuwa ne kawai bayan haɗawa da direbobi na musamman, kasancewar su ya kamata a ɗauki su a gaba. Hanya mafi sauki don samun duk abubuwan da suka dace, ta amfani da mai gyara ta atomatik wanda masana'anta ya bayar, ake kira Nokia Haɗin Direban Cable.

1. Zazzage sabon sigar Nokia na injin da aka injiniyar Nokia akan mahaɗin da ke ƙasa kuma fara fayil ɗin shigar da karɓa da aka karɓa.

   

   Download direbobi don Nokia 6300 Firmware ta waya (RM-217)

2. Danna mabudin tambarin a cikin zaɓi na yaren mai sakawa.

   

3. Sannan danna maɓallin kibiya yana nuna dama.

   

4. Fassara maɓallin rediyo a cikin "Na yarda ..." A ƙarƙashin rubutun yarjejeniyar lasisin kuma danna maɓallin "Ci gaba".

   

5. Ana tsammanin shigarwa na direbobi su firmware Nokia na'urori zuwa kwamfuta.

   

6. Danna maɓallin tare da alamar duba Green bayan karba sanarwar "shigarwa".

   

Bayar da bayanai

Idan an shirya tsarin na'urar, aiki a gaba, kafin aiwatar da bayanan firmware ɗin, yana da kyau kwafin bayanan shago a cikin wurin ajiya, ba shakka, idan sun wakilta ku.

Yi ƙayyadadden da hannu da aka yi - alal misali, ta hanyar sanya lambobi a katin SIM, da / haɗa injin zuwa PC da kwafa abun cikin diski. Amma yana da tasiri sosai don ƙirƙirar kwafin ajiya na duk bayanan daga na'urar don amfani da na'urorin software na musamman don aiki tare da na'urorin software a PC, wanda masana'anta ya gabatar - Nokia Suite..

Zazzage Manajan Nokia Suite tare da Nokia 6300 Waya akan kwamfuta

Mataki na 1: Shigarwa software

1. Zazzagewa ta danna maɓallin da ke sama, sannan buɗe fayil ɗin Nokia_suite_webinstalller_all.exe..

   

2. Shigar da mai sarrafa Nokia ya hada kai zuwa kwamfutarka, bin wasu tsoffin mayen software. A zahiri, kuna buƙatar danna "Saita" a cikin taga na farko na mai sakawa,

   

   "Yarda da yarjejeniyar lasisi,

   

   Kuma a sa'an nan tsammanin tura shirin akan faifan PC.

   

   Af, a cikin aiwatar da shigarwa na Nokia, windows an haɗa su don haɗa na'urar hannu ta amfani da haɗin USB zuwa direbobin komputa.

3. Danna "Run Nokia Suite" a cikin gamsuwar shigarwa mai maye, idan kanaso ka fara aiki tare da shirin.

   

Mataki na 2: Ajiyayyen

1. Idan ba a yi wannan ba tukuna, buɗe manajan Nokia Man tare da gajerar hanya a kan teburin Windows ɗin.

   

2. Haɗa wayar zuwa tashar jiragen ruwa na YusB na PC ta amfani da Mini-USB. A cikin injin, zaɓi "Ok", sannan "yanayin Nokia" - "zaɓi".

   

3. Bayan karɓa a cikin na'urar Nokia 6300 wanda aka haɗa, ka danna maballin "gama".

   

4. A cikin manajan, bude menu "kayan aikin" da

   

   Zaɓi abu "madadin".

   

5. Danna "Gaba" a cikin taga wanda ke buɗewa.

   

6. Yanzu, ta hanyar shigar / cire alamomi a cikin nau'in bayanan da aka nuna, zaɓi bayanin da aka ajiye daga wayar hannu.

   

7. Optionally, ta amfani da maɓallin "Canza", zaɓi direba daban akan faifan PC inda bayanin zai sami damar bayanin

   

   Shiga ciki a cikin "Ajiye AS" taga.

   

8. Don fara cire bayanai daga ƙwaƙwalwar wayar hannu da sanya bayanai a cikin fayil ɗin fayil, danna "Fara".

   

9. Tsammanin aiwatar da Nokia 6300 don kammala, sannan

   

   Danna maɓallin "gama".

   

Mataki na 3: Maido da bayanai daga kwaya

Don tura bayanai daga Ajiyayyen akan wayar bayan Firmware:

1. Haɗa na'urarku zuwa shirin Nokia Suite.

   

2. A menu "Kayan aiki", zaɓi Mayarwa.

   

3. Danna "Gaba" a cikin "Mayar da Nokia 6300" taga.

   

4. Idan ya cancanta (idan akwai bayanan ajiya da yawa daga na'urar), zaɓi fayil ɗin fayil, ta amfani da jerin zaɓi "mayar da abun ciki daga:".

   

5. Danna "Fara".

   

6. Bayan haka, sa ran ƙarshen bayanin ajiyayyun bayanan da suka gabata ta wayar.

   

7. Bayan kammala aikin, Nokia 6300 za a sake gina ta atomatik,

   

   Bayan haka, zaku iya danna "shirye" a cikin manajan taga, cire haɗin wayar hannu daga kwamfutar kuma ci gaba zuwa aikinsa.

   

Sake saita sigogi da hanya "Hard sake saiti"

Ba duk matsaloli tare da shirye-shiryen shirin wayar a jerin 40 suna buƙatar cire shi daidai don sake kunna Software na tsarin. Mafi sau da yawa, matsala a cikin na'urar za a iya haifar da kasawa a cikin saitunan ko an tara shi a cikin na'urar ta hanyar sharan na aikace-aikacen aikace-aikacen, bayanai, da sauransu. Don haka, don dawo da madaidaicin matakin aiki na Nokia 6300, sau da yawa ya isa ya aiwatar da tsarin don kammala karatun ta don dawo da sigogi masu aiki zuwa dabi'un masana'antu.

Hanyar kawo saitunan (kuma su kawai su) Software na na'urar software ɗin da kanta zuwa ga asalin abubuwa biyu suna aiwatarwa.

1. A waya, tafi tare da hanyar "- -" Saiti "-" dama. STD saita. ".

   

   Zaɓi "Ci gaba." Kuma shigar da "lambar kariya:" (tsoho 1234 ko 12345).

   

   Yi tsammanin sake kunnawa na wayar hannu wanda ya bayyana "Saiti ya dawo" Fadakarwa.

   

2. Rubuta a kan keyboard na kayan mashin * # 7780 #, danna "Ci gaba." Kuma shigar da lambar tsaro.

   

   Jira aikin kawo kwatancen siga zuwa masana'anta, wanda ke tare da sake kunna na'urar. A ƙarshen hanyar, saita tsarin sake.

   

Cikakken Sake saitin Nokia 6300 (Saƙon gaba) , ba shi da kawai dawowar saitunan na'urar zuwa asalin bayanan mai amfani daga gare ta, a yanayin samfurin, ana aiwatar da shi ne kawai tare da taimakon software na musamman. Mafi sauki mafita shine ci gaba Kayan aikin Mynokia V1.1.

Yana da mahimmanci a lura cewa an ba da shawarar wannan hanyar da za a za'ayi kafin da bayan walƙiya Nokia 6300 ta kowane ɗayan hanyoyin da ake samu, idan za ta yiwu.

Zazzage amfani da kayan aiki na Mynokia V1.1

1. Load da aka ajiye bayanai akan mahadar da ke sama da kuma cire shi. Gudun fayil ɗin. Mynokiool.exe..



2. Haɗa 6300 zuwa PC ta amfani da kebul ɗin ta amfani da kebul, zaɓi "Yanayin Nokia" azaman yanayin haɗin.



3. A cikin mainokia tul taga, danna maɓallin "Haɗa" maɓallin.



4. Bayan samun yankin "log" da aka haɗa! ", Je zuwa shafin" kaya "ta danna sunan ta a gefen hagu na taga mai amfani.



5. Danna "Sake saiti Saiti" da tabbatar da bukatar da aka karɓa daga kayan aiki na Mynokia ta danna "Ok".



6. Yi tsammanin kammalawa cikakken sake saiti - yayin aikin, wayar zata kashe.



7. Lokacin da Amfanin ya ba ku labarin nasarar aikinku a cikin "log", cire haɗin wayar daga PC, Cire ka saita baturin sannan ka fara na'urar. Na gaba, saita sigogi na Nokia 6300, bayan wanda zaku iya ƙara amfani dashi.

Versions da iri firmware, download, unpacking

Kafin wani abu alaka da Nokia firmware 6300 jan, yana da muhimmanci a gano da tsarin software taro yawan kula da wannan na'urar a wannan lokacin, tun da mafi amintattu da shawarar tsarin kula da reinstalling da tsarin ne don gudanar da wannan aiki ba tare da rage cikin jerin 40 taro lambar.

Rubuta na'urar * # 0000 # keyboard a kan keyboard - na biyu layi a kan allon cewa ya buɗe allon dace to da ake so bayanai.

Idan wayar ba kunna da kuma gano da version na tsarin ba zai yiwu, a cikin aiwatar da tanadi programmatic ɓangare na shirin rarraba, ya kamata ka yi amfani da latest jerin 40 taro domin Nokia 6300 - V 7.30.

Kafin ka zabi tsarin da software shigarwa Hanyar cikin wani mobile na'urar, ko kuma wajen, da software kayan aiki da abin da hanya za a aiwatar, dole ne ka download da kuma fitad da kaya da fayiloli integrable cikin na'urar zuwa faifai. A cikin labarin Next, za mu nuna shigarwa na dama firmware zaɓuɓɓuka saboda Nokia 6300, tsarin ne mafi m for kullum aiki:

• version 7,21 - The latest hukuma taro na tsarin ga waɗanda samfurori da model karkashin shawara, wadda aka kawota ga Rasha-harshen yankin.

  Download hukuma firmware 7,21 Nokia 6300 waya

• Version 7.30 Lite. - System software halitta a kan tushen da official version na firmware daga Nokia saki ga mutum yankuna, tsarkake daga "ba dole ba" bisa ga halitta na gyara da kuma tare da wani hadedde Rasha-magana dubawa.

  Download firmware 7.30 Lite Phone Nokia 6300

• Mod 7.30 matsakaicin - dabam-dabam daga baya daya daga cikin samarwa versions na tsarin for gaban da taro na ƙarin aka gyara (shirye-shirye, jigogi, jigogi) da kuma damar modified ta gogaggen masu amfani da tsarin, wanda za a iya bada shawarar ga wadanda suke so su samu mafi cika na'urar nan da nan bayan reinstalling ta software dandamali.

  Download modified firmware 7.30 Maximum Phone Nokia 6300

Bayan da tsarin fayiloli kunshe da za a yi nufin batutuwa a cikin wayar hannu da na'urar za a iya samu, shi dole ne unpaved a kan PC faifai:

1. Bude da sauke exe-rarraba da firmware.

   

2. Danna "Next" ( "Next") a cikin na farko

   

   Biyu windows a guje shigarwa maye.

   

3. Don kauce wa rikice da kuma matching da wuri daga cikin fayiloli tare da kara umarnin daga wannan abu, ba su canja hanyar unpacking da aka gyara! Danna "Next" ( "Next") a cikin taga inda aka nuna.

   

4. Danna "Saita" kuma sa ran za a kammala kwafin Nokia 6300 Filmware fayiloli zuwa faifan PC.

   

5. A cikin dakatarwar gamawa na mai sakawa, danna "Gama" ("Kammala").

   

6. Bugu da ƙari . Idan ka yanke shawarar yin gwaji tare da sigogin daban-daban na tsarin akan wayarka, Share firmware a saman firmware da ke sama kafin amfani da sauran Majalisar! Za'a iya yin wannan ta hanyar kwamitin kula da Windows, yana aiki daidai kamar dai kun share duk wani shiri daga kwamfutar.

   

   Kara karantawa:

   Cire shirin ta amfani da kwamitin kulawa da Windows 7

   Cire shirin ta amfani da kwamitin kula da Windows 10

Shawara

• Ayyuka na inganta kutse tare da kayan aikin software ya kamata a aiwatar da su ta hanyar sakin ta daga katin SIM da drive mai cirewa.
• Kafin gudanar da hanyoyin, dole ne ka cajin batirin na na'urar.
• A lokacin firmware kuma kafin fara aikin, ya kamata a buɗe komputa don ƙaddamar da software na musamman ga Nokia (Ovi Suite, PC Suite, NSU, da sauransu).
• A kan aiwatar da mai kunna tsarin wayar hannu, ba shi yiwuwa a cire haɗin kebul ɗin da ke hade da tashar USB na Past daga gare ta. Hakanan kuma bai kamata a matse akan wayar kowane maɓallan ko ƙoƙarin amfani da ayyukan ta ta hanyar ba.

Yadda za a Flash The Nokia 6300 Waya (RM-217)

Zabi na hanya don ingantacciyar hulɗa tare da Nokia 6300 Software Software (RM-217) a halin yanzu saboda gudanar da kayan aikin da ke gudanar da irin waɗannan ayyukan. Software na hukuma, dangane da dakatar da tallafin na kayan aikin ta masana'anta ya sanar a taken taken, saboda haka dole ne ya juya zuwa ɗayan ingantattun shirye-shirye, zuwa mafi girman da aka yi niyya amfani da kwararru.

Hanyar 1: J.F (Just Wani Fasasher)

Da aka sani a cikin da'irar masu amfani da ƙirar da Injiniyan sabis na software na Injiniya na kayan wayoyin Nokia - J..f. Kawai wani flasher) Ba ku damar warware duk ayyukan da ke tattare da gudanar da ayyukan magudi game da tsarin dandamali na samfurin 6300 (RM-217).

Sanya da ƙaddamar da j.a.f

1. Kunna ɗayan mahaɗan masu zuwa, zazzage da ya dace an sanya shi a kwamfutarka ta Windows J..f. Fitad da sakamakon tushen kayan tarihi.

   Download Nokia J.A. Wurin Filmware na waya 1.98.66 x64

   Download Nokia J.A. Wurin Filmware na waya 1.98.66 X86

2. Fayil J.A.f 1.9.66.exe

   

3. Danna "Next" a cikin ta farko biyar windows

   

   Running shirin shigarwa maye.

   

4. Danna "Sa" a cikin "All Gama don fara zuwa a fara" taga sa'an nan zata zuwa cikakken kwafin fayiloli zuwa PC faifai.

   

5. A karshen sakawa, danna "Gama".



6. Tsaida karfinsu yanayin da Windows XP (Update Kunshin 2)

   

   Domin da "Fara J.A.F." kwamfuta lakabin ya bayyana a kan tebur.

   

   Read more: Enable shirin jefa karfinsu yanayin a cikin Windows

7. Gudanar da shirin. A farko taga cewa ya buɗe, danna "Start".

   

8. A wannan, duk abin da yake da Nokia na'urar firmware a cikin jerin 40 dandali shigar, bude da kuma shirye su yi ta ayyuka. Duk yadda ake gudanar da Nokia 6300 suna da za'ayi bayan ya sauya sheka zuwa "BB5" tab a cikin shirin bangare menu.

   

Firmware a al'ada mode (update)

A general, da cikakken walƙiya na Nokia model a kan Series 40 a aiki yanayin ta hanyar J.A.F. Nuna cewar wadannan umarnin. Shawarwari ne na wajibi idan kana so ka samu cikin RM-217 na'urar a cikin "akwatin" jiha a cikin bangare na tsarin software da kuma / / ko sabunta ta firmware. A cikin misali a kan saman version 7,21 Girkawar da aka kafa 7.30 (Dole ne pre-unpacked a kan PC faifai).

1. Run da Just Wani FLASHER, zuwa BB5 tab.



2. Haša hada inji zuwa PC, zaɓi "Nokia yanayin" a kan shi.



3. A cikin "Ayyuka:" yanki na J.A.F. Danna maɓallin don cire button daga mobile na'urar - "INF".



4. Jira a bit har aiwatar qaddamar a mataki a sama. A sakamakon haka, halin da kirtani a kasa daga cikin firmware taga za a cike da bayanai (model, version na shigar tsarin, IMEI) - a lokacin da wannan zai faru, za ka iya canzawa zuwa gaba batu na umarni.



5. Tabbatar cewa japh dubi kama da image kama a cikin wadannan screenshot, kuma

   

   Click a kan "Flash" button a cikin Ayyuka yankin.

   

6. Danna "Eh" a cikin nuna shirin request taga.



7. Sa ran kammala matakai na farko mai tsabta

   

   Kuma a sa'an nan tasiri a ƙwaƙwalwar ajiyar wayar.

   

8. A sakamakon wata nasara da ingantaccen aiki, da wayar hannu da na'urar za ta atomatik kunna, da kuma "Anyi!" Window zai bayyana a cikin ajiya starring yankin.

   

   Bayan reinstalling da tsarin software, shi ne shawarar zuwa yi wa "Hard Sake saitin" aiki, kamar yadda aka bayyana a kashi na farko na wannan labarin.

9. A wannan kusan kome da kome, zaɓi Rasha-magana dubawa, wucewa zuwa Nokia 6300 a hanya:
   • "Menu" - "Settings" - "Phone".

   

   • "Harshe Saituna" - "Phone Harshe" - "Rasha".

   

10. Yanzu za ka iya fara amfani da Nokia 6300 kamar yadda ya saba yanayin.

Girkawa na modified firmware (Manual Mode)

Don yadda ya kamata shigar gyara 7.30 Maximum da sauran irin wannan mafita cewa za a iya samu a yanar-gizo dole ne a yi da ɗan daban-daban daga cikin umarnin samarwa a sama. Fitad da kaya da firmware ga kwamfuta faifai sa'an nan aiki a matsayin haka.

1. Kunna da Nokia 6300 da kuma gama da shi zuwa PC. Zaɓi "Nokia Mode" a matsayin Hanyar matching da Phone da kuma Big Brother. Buɗe J.A.F. , Go to da "BB5" shirin.



2. Duba factor a gaban akwati "Al'ada Mode" na Flash Saituna yankin, saita Factory Sa a nan.



3. Click a kan "MCU" button.

   

   A bangaren selection taga cewa ya buɗe, tafi tare da hanyar C: \ Shirin Files (86) \ Nokia \ Phoenix \ Products \ RM-217, sai kuma ka danna fayil icon RM217__07.30.Mcusw..

   

4. Next, click a kan ppm button,

   

   Saka da fayil shirin RM217__07.30.PPM. (An located a cikin wannan fayil a matsayin RM217__07.30.Mcusw. A directory yana buɗewa ta atomatik).

   

5. Click a kan "CNT" button a cikin J.A.F.

   

   zaɓi fayil rm217__07.30.image-1. . Bugu da kari, za ka iya saka da tsarin yin amfani da fayil. RM217__07.30.image-0 Idan ba ka so ka cewa a lokacin firmware a cikin na'urar akwai wani hadedde abun ciki a cikin kunshin.

   

6. Tabbatar cewa kawai taga harshen wuta yana kama da allon sikelin da ke ƙasa, sannan kaɗa maɓallin Flash ɗin.



7. Ya rage don tabbatar da bukatar firmware, danna ƙarƙashinsa "Ee", bayan hadadden tsarin da aka daidaita a Nokia 6300 zai fara.



8. Yi tsammanin kammalawar JAF magudi da shirin, lura da alamar firmware

   

   da kuma cika sanarwar "hali da sakamakon" filin.

   

9. Da zaran hanyoyin da aka fara a baya dangane da Nokia 6300 aka kammala, shirin zai sanar da wasan kwaikwayon "aikata!". Na'urar hannu za ta kunna ta atomatik kuma shigar da madadin software wanda zai fara dashi.



10. Saita lokaci da kwanan wata.

    

    Bayan haka, aiwatar da dawowar wayar zuwa saitunan masana'antu ta amfani da hade * # 7780 #.

    

11. Yanzu wayar a ƙarƙashin ikon sarrafa firmware ke shirye don aiwatar da ayyukan.

Maidowa (Firmware a cikin "Yanayin Matattu")

Ko da Nokia 6300 a zahiri ba ta ba da alamun rayuwa ba, tsarin tsarin akan na'urar ya daina aiwatar da ayyukan su yadda yakamata, da sauransu, j.a.f zai iya taimakawa wajen dawo da aikin wayar. A cikin sharuddan kayan aiki masu aiki, amma ba a hada shi ba, umarnin masu zuwa sun shafi na'urori RM-217.

1. Cire sabon kunshin fayil ɗin tsarin don na'urar hannu zuwa faifan PC, saita "firmware" direbobi zuwa kwamfutar.
2. Don bincika batun hangen nesa na kayan aikin da ba a kare shi ba tare da kwamfuta:
   • A wani ɗan lokaci, cire baturin daga wayar hannu, sannan shigar da shi a wuri.
   • A PC, buɗe wayar na'urar "Windows.

     

     Karanta: Hanyoyi don ƙaddamar da "Manajan Na'ura" Windows

   • Haɗa PC da Nokia 6300 na USB, to a takaice (na 2 seconds), danna kan maɓallin "Power".
   • A sakamakon haka, dole ne a gano na'urori biyu: "Nokia USB walƙiya daga iyaye", hade a cikin "Manajan Na'urar Sadarwar Sadarwar" na'urori ".

     

     A kayyade aka nuna a cikin "Du" taga na wani dan gajeren lokaci, kawai kamar wata seconds, shi wajibi ne don tsayar a hankali, kuma idan ba ku yi da lokaci ga, maimaita ƙoƙari interfacing da wayar hannu da na'urar da PC aka bayyana a sama !

   Tabbatar da ganin cewa OS "gani" da na'urar, cire haɗin YUSB na USB daga gare shi, kuma zuwa mataki na gaba na wadannan shawarwari.

3. Run JAF, zuwa BB5 tab.



4. Next, ba da Chekboxes "manual Flash", "Factory Sa", "Matattu USB", dake a cikin Flash Saituna yankin.



5. Cire akwati da Crt 308 akwati sa'an nan duba akwatin kusa da "Amfani Ini" zaɓi.

   

   A sakamakon haka, da "Zabi Phone Model" taga ya bayyana, inda kana bukatar ka haskaka da "RM-217 Nokia 6300" line sai kuma ka danna "Ok".

   

6. Kusan duk abin da yake a shirye su fara da firmware (dawo). Haɗa wayar zuwa PC na USB, samun shirye su latsa "Kunna" key. Click a kan "Flash" button a cikin JaF shirin taga, sa'an nan "I" a karkashin bukatar cewa yana bayyana.



7. Da zarar a cikin "Status da Results" yanki na firmware taga, "Neman Phone ..." zai bayyana, danna kan Nokia 6300 sharuddan sauyawa key.

   

   A sakamakon haka, da mobile na'urar za a ƙaddara a cikin shirin da kuma tsabtace za a fara, sa'an nan overwrite ta ƙwaƙwalwar.

   

8. A hanya da a maido da zuwan mai gaskatãwa ga nasarar da sakon "An gama!" A Status da Results filin, da Just Wani FLASHER taga da kuma na atomatik waya ya sauya sheka a.



9. Bi hardware sake saiti na na'urar, kamar yadda aka bayyana a kashi na farko na yanzu abu, sa'an nan za ka iya saita da amfani da Nokia 6300 tare da mayar da software bangare a cikin saba yanayin.

Ragewan da firmware version

Idan saboda wasu dalilai kana bukatar ka runtse da version na Nokia 6300 firmware, shi wajibi ne su yi aiki bisa ga wadannan umarnin, amma kada ka manta da cewa hanya ne halin da babban mataki na hadarin lalacewar da wayar ta software da kuma ba bada shawarar ga kisa! A misali, da firmware rollback aka yi 7.30 Zuwa 7,21.

1. Cire, idan shigar, firmware kunshin 7.30 daga PC faifai, kamar yadda aka bayyana a kashi na farko na mu labarin da

   

   Expand Majalisar Distribution 7,21.

   

2. Haɗa na'ura ta hannu zuwa tashar USB ta kwamfuta a yanayin Nokia.



3. Buɗe Jaf da kuma yankin Flash ɗin Flash a shafin BB5 shafin a cikin shirin, saita fitilar filastawa, masana'anta, "ƙasa da shi".



4. Danna akwatin akwati "Yi amfani da Ini".



5. Danna kan layi "RM-217 Noika 6300", a cikin jerin da aka nuna, yana nuna shi kuma danna "Ok".



6. Latsa maballin "Flash" da

   

   Tabbatar da niyyar ku ta danna "Ee" a ƙarƙashin buƙatar da ya bayyana.

   

7. Yi tsammani yayin da wani mai flasher

   

   Cire wayar.

   

8. Bayan kammala dukkan matakai a yankin shiga, wanda aka yi zai bayyana, kuma na'urar wayar hannu zata fara ta atomatik kuma ta samar da ikon zabar manyan sigogi.

Hanyar 2: Software Software na Phoenix

Babu gurbata da aka sani da J..f. , tsakanin masu amfani da software da gogewa masu amfani da wayoyin Nokia da kuma jerin 40 - Software na sabis na Phoenix. Hakanan zai iya taimakawa yadda ya sanya firstware a kan samfurin 6300, sabunta tsarin akan na'urar da kuma mayar da kayan software bayan lalacewa.

Ta hanyar Phoenix, ba shi yiwuwa a rage sigar tsarin a kan na'urar hannu kuma ya kamata kuma ba ƙoƙarin kafa bambance bambancen bambancen software na software. Domin magudi da aka yi da wannan software dangane da samfurin RM-227, ana bada shawarar amfani da sigar Firmware na hukuma. 7.30 Lite. An saukar da shi ta hanyar tunani daga sashin farko na wannan labarin!

Sanya software na Phoenix

A lokacin wanzuwa da haɓaka software na Phoenix, da yawa daga juyi da aka saki, wanda aka rarrabe ta da ƙarfin ma'amala da iyawa. A cikin umarnin, ana amfani da wannan a cikin masu zuwa kuma ana gwada shi don samfurin a hankali. 2012.50.001.49220.

Zazzage Software Software ta Poenix 2012.50.001.49220

Amma ga shigarwa na kudade zuwa PC, yawanci babu matsaloli suna tasowa tare da wannan tambayar - komai abu ne mai sauqi:

1. Gudun fayil ɗin fayil ɗin da aka saukar don sanya kayan aikin firmware nokia.



2. Danna "Gaba" a farkon

   

   Kuma na biyu windows na shirin shigarwa maye maye.

   

3. Yi tsammanin kwafin Software na Software na Phoenix zuwa faifan komputa.

   

4. A cikin taga mai sakawa na ƙarshe, cire "tafi zuwa Blog" kuma danna "Gama".

   

5. An gabatar da ƙaddamar da Phoenix ɗin ta danna Danna sau biyu akan gajeriyar hanyar shirin a kan tebur na Windows ko daga babban menu na OS.

   

Firmware a cikin yanayin al'ada (sabuntawa)

1. "Sanya" firmware a cikin kwamfutarka da aka yi niyya don haɗa kai cikin na'urar.



2. Kunna wayar kuma haɗa shi daga PC a yanayin Nokia.



3. Run Phoenix.

   

4. A cikin "haɗin kai:" Jerin Down

   

   Zaɓi "USB - USB - RM-217".

   

5. Bude menu na "fayil",

   

   Select Scan Samfurin abu a ciki.

   

6. Jira har sai shirin ya sami cikakken bayani game da wayar kuma sanya shi Firmware -

   

   Za'a nuna bayanai a cikin sandar matsayin a kasan phoenix taga.

   

7. A cikin menu na "Flashing" menu

   

   Zaɓi "sabuntawa".

   

8. Danna maɓallin "..." maɓallin kewayawa kusa da "lambar samfurin:" filin.

   

9. A cikin taga da ke buɗe, zaɓi ɗaya daga cikin layin da ke ɗauke da alamar "Yuro", danna "Ok".

   

10. Komai a shirye don fara firmware, danna maɓallin "Maimaitawa".

    

11. Yi tsammanin kammala aikin tsarin Nokia 6300 daga diski na PC zuwa injin, wanda ke tare da cike gurbin sandar matsayin a cikin taga Phoenix. A cikin aiwatar yana faruwa:
    • Samuwar hoton firmware da canja wurin sa zuwa wayar;

    

    • Tsaftace yankunan ƙwaƙwalwar ajiyar na na'urar daga waɗannan bayanan;

    

    • Haɗin "sabon" abubuwan haɗin a cikin na'urar.

    

12. An kammala ingancin aiki ta hanyar tabbatar da ingancin ma'anar "samfurin mai faci ta yi nasara" taga - danna shi "Ok" kuma rufe Phoenix.

    

13. Na'urar hannu lokacin da aka kammala firam ɗin ta atomatik, cire haɗin ta daga tashar USB na USB. Ya rage don saita wayar da kara amfani dashi don manufar da ta yi niyya.

Firmware a cikin "yanayin da ya mutu" (idan wayar ba ta kunna)

Ta Software na sabis na Phoenix. Zai yuwu a mayar da tsarin don Nokia 6300, hadarin, wato, mayar da na'urar zuwa na'urar, idan rashi ya lalace ta hanyar lalacewa sashin shirin.

1. Shigar da direbobi da kuma cire kayan masarufin PC, bin umarnin daga bayanin shirye-shiryen wannan labarin.
2. Duba bayanan hangen nesa na "matattu" na tsarin windows. Don yin wannan, cire baturin na'urar wayar hannu na ɗan lokaci kuma shigar da shi a wurin. Sa'an nan kuma buɗe Manajan Na'ura a kwamfutar, haɗa wayar zuwa mai haɗa USB kuma a taƙaice latsa maɓallin wuta a kan wayarku.

   

   Sakamakon kocin na'urar, 2-3 seconds dole ne nuna sabon reshe na na'urorin sadarwa na'urorin sadarwa na'urorin sadarwa da abubuwa biyu: "Nokia USB Mashaka Iyaye". Idan wannan ya faru, je zuwa matakai masu zuwa.

3. Idan ba tare da cire haɗin Nokia 6300 daga kwamfutar ba, gudanar da shirin Phoenix.



4. A menu "Fayil", zaɓi Buɗe samfuri.



5. Zaɓi layin "RM-217 Nokia Rm-217" a cikin taga wanda ke buɗe sannan kaɗa Ok.



6. Je zuwa menu na "Flashing", kira fasalin sabunta firmware.



7. Latsa maɓallin "Lambar Samfurin" zaɓi maɓallin, zaɓi layin da ke ɗauke da "Yuro" kuma danna "Ok".



8. Saita "Markus na amfani da wayar ta wayar tafi-gidanka" Alama, sannan a dafa maɓallin "Power" a waya, danna "Maimaitawa".



9. A cikin taga da ke buɗe tare da umarnin don haɗa na'urar, danna "Ok". Nan da nan, - Danna kan Nokia 6300 "Kunna" maɓallin kuma riƙe shi na 2 seconds.



10. A sakamakon haka, tsarin firmware zai fara, wanda zai da minti 7-10. Yi tsammanin kammala tsarin aikin Nokia 6300 software don mayar da shirin Phoenix, ba tare da ɗaukar wani aiki ba.



11. A karshen Firmware na karshe, waya zai nuna yana tabbatar da ingancin aikin "samfurin mai walƙiya ya yi nasara" taga, danna shi "Ok". Na'urar hannu zata kunna ta atomatik.



12. A kan wannan, maido da kayan aikin Nokia 6300 ya cika - Zaɓi Saitunan na'urar kuma ci gaba zuwa aikinsa kamar yadda aka saba.

Ƙarshe

Duk da mai amfani da ba a sani ba, hadaddun firamware na Nokia 6300 Wayar hannu, ana aiwatar da irin wannan aikin a "yanayin gida", idan kayi amfani da ingantaccen software na musamman kuma bi ingantaccen umarnin.