Yadda Ake Nage PS4 Joystick

Muhimmin! Duk sun bayyana ƙarin ayyuka da kuka yi a haɗarin ku!

Mataki na 1: Shiri

Kafin fara hanyar, ya zama dole don shirya wurin aiki da kayan aikin. Mafi kyawun zaɓi zai zama babban tebur mai santsi a kan wanda ruguwar agogon iska yana aiki tare da lantarki.

Mafi ƙarancin tsarin kayan aikin da ake buƙata ya ƙunshi:

• Cristproof ph0 (6 mm);
• Blades don aiki tare da lantarki (ƙarfe ko filastik) ko madadin katin tsohon banki ko mai ƙidaya da ba dole ba ne daga rigakafin robobi;
• tweezers;
• Farantin bakin ciki wanda aka yi da dumbin abu (alal misali, conuster da aka karya).

Bayan shirya wuraren aiki da kayan aikin, zaku iya motsawa zuwa mataki na gaba.

Mataki na 2: Disassebbly

Hanyar da ba ta disascymblling da Dulasmamba 4 tana da sauki, amma kuna buƙatar yin hankali - babban mahaɗan abubuwa sune shirye-shiryen filastik, ƙwaya.

1. Juya gamepad zuwa ƙasa sama da kwance kwatangwalo huɗu - an nuna wurin a hoton da ke ƙasa.



2. Yanzu za mu bincika shari'ar.

   Yi matukar kyau! Devest Case an haɗa shi ta hanyar madauki, tare da lalacewar abin da kwamiti na LED zai ƙi!

   Akwai hanyoyi guda biyu. Na farko shi ne a hankali zana kowane shirye-shiryen bidiyo a cikin da'ira: Yi felu a cikin ramin da tashar caji, to, matsa tare da clamps. Jagorar motsi ba ta wasa wani aiki ba.

   

   Hanya ta biyu tana kama da na farko, amma amfani kawai amfani da ruwa. Don yin wannan, saka kayan aiki a wuri guda a wani kusurwa na kimanin digiri 70 da ƙasa zuwa girgiza.



3. Lokacin da rarraba ma'anar Geypmpad PS4 na bita na farko, wasu masu amfani suna fuskantar matsaloli a cikin haɗin claps na sama. Kuna iya sauƙaƙe aikin ta amfani da farantin karfe: Shigar da shi cikin sarari tsakanin l1 da shari'ar, to, a latsa ƙasa. Lokacin da latch latch, maimaita aikin ƙarshe daga maɓallin R1.



4. Don cire haɗin rabin wasan, matsa jobs sai a fara sarrafa kwamitin gaba da sama.

   Hankali! Ka tuna madauki! Hakanan yi hankali da masu shan sigari, suna da nauyin bazara kuma suna iya tsalle ne!

   Don bita na biyu, dialshock 4 knucks baya buƙatar latsa.



5. Cire haɗin madauki, ya kamata a cire shi cikin mai haɗi.



6. Yanzu har yanzu cire baturin - yana haɗe da haɗin gwiwar da aka saba don Sony, wanda ake cikin sauƙi tare da hakkin ko a hankali tare da hannuwanku.

   

   Yi ado da kuma busabar batirin - shi, kamar mahalli, an haɗe shi da taimakon latch.



7. Yanzu kashe kebul na USB. A hankali yi la'akari da shafin haɗin (ana iya sa a ƙarƙashin gilashin ƙara girma) - dangane da bita na na'urar, mai haɗi na iya shigar da maɓallin filastik ko kuma ana saka kebul na m. A cikin shari'ar farko, za ta iya buɗe: a hankali za ta iya sanya felu a ƙarƙashin mai haɗawa da ɗaga.



8. Don cire hukumar, ba a ware ta da sauri dunƙule a cikin cibiyar - yi aiki da kyau kamar yadda kar a tsage lambobin vibromotors.



9. Yanzu ɗauki vibromotors kuma a hankali ja kwamitin daga shari'ar.



10. Sannan ya kasance ne kawai don cire silicone silicone na Buttons da maballan kansu.

A kan wannan rikice-rikice, dialshock 4 za'a iya la'akari dashi. Don gina na'urar, bi umarnin da ke sama a cikin tsari na baya, amma ka tuna madaukai da wayoyi na vibromotors.